Installing a Brick Paver Walkway or Big Grey Bricks

The use of Bricks or Pavers to develop a pathway or outdoor patio complements a house in a method that is unmatched. In addition, installing a Brick or Paver walkway does not necessarily require a pro.

The key to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be installed. The area ought to be dug out at least a foot down, removing all topsoil and clay soil. In addition, string lines must be strung on each side of the sidewalk. The string lines show the ended up height of the pathway.
When the location has been dug down, 3/4" gravel stone need to be laid in and tamped down tightly. The height in between the tamped down sand and the stringline should equate to the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the ready location. These strips will function as your sidewalk border and aid to keep the stability and shape of the sidewalk. You can get these plastic strip borders at a lot of house enhancement stores. The strips get more info need to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

You can then start to lay the bricks/pavers as soon as this is done. There are numerous patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the integrity of the pathway.

Inevitably bricks/pavers will need to be cut or split when building the walkway. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you want to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the brand-new sidewalk and sweep into the cracks. This will complete the interlocking of the bricks and help to eliminate any weed development.


In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or journal board the length of the walkway on either side of the sidewalk. These strips will act as your pathway border and assistance to maintain the stability and shape of the pathway. Inevitably bricks/pavers will require to be cut or divided when building the sidewalk.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Big Grey Bricks”

Leave a Reply

Gravatar